Learn Photoshop for Free

Hello, Photoshop CS or Elements & Lightroom are pretty much industry standard software for working with photos these days. If you are a digital photo pro or graphics person, scrapbooker, etc. you pretty much have to know PS or an equivelent (which in my opinion, there are none, but that is only because I know PS best).

There are classes offered at any self respecting art or vocational school and most community collages, but they can be pricey and time consuming. Don't forget there is a lot you can learn from library books and online resources for free. I just added a resource on this blog offering some tips on PS that you might find helpful. Please check it out in the side bar.

How to Create Soldered Glass Slide Jewelry, Part 4 - Tips & Troubleshooting

Over the last few months I have blogged about creating soldered glass slide jewelry using the techniques learned in the Simply Swank soldering class that I took and some things that I had learned elsewhere. A few months down the road, and I still cannot claim to be an expert on the subject, but I have learned a thing or two and improved my technique I think, so I want to share in case it might help someone.

Most of the things I am about to say will cause you to say, "Duh!" because they seem obvious, but it's easy to get so in to the art part that you forget the common sense part. At least it is for me. =o)
This assumes you have already read my previous soldering blogs parts 1, 2 & 3... If not, ya might want to check 'em out.


Tips
1. Don't solder naked! A. Because it's just not pretty and B. Because solder & flux can splatter and drip. Make sure you solder over a heat resistant surface. Make sure your hands are higher than the molten solder at all times so you cannot get burned if it runs and drips. Wear shoes. Wear safety glasses. Wear a mask. Wear a smile.

2. Gravity applies to molten solder. Pay attention to the angle of the piece when you are soldering. It's natural to want to tilt the piece back to get a better view of the solder you are trying to add to the front, but don't be surprised when the solder runs to the back. You can use gravity to your advantage to manipulate where the solder goes. You can also use it to remove excess solder. Melt extra solder and push it off the end that is pointed towards your heat resistant work surface.

3. Always keep your soldering tip silvered and keep a spare soldering iron tip on hand. Wipe the solder tip on a wet sponge often while in use to keep it clean and from overheating. Don't leave the iron idol just cooking away. Unplug it if you are not going to use it right away. They do wear out because of the extreme heat. Tips can become pitted and can quit working right in the middle of a project. If the tip no longer appears silver, it will not work properly. See the troubleshooting section below for more information.

4. Don't mix ammonia with blackening agent. If you will be using a patina, it most likely contains an acid that is very toxic and corrosive. Most become extra nasty if combined with ammonia. Guess what is in your average glass cleaner that you probably use to clean your slides? That's right... ammonia. Do NOT mix. Use gloves, eye protection and major ventilation and follow all of the manufacturers cautions to a T when using patina. Dispose of leftovers appropriately. I recommend not pouring this stuff into a cup to use it, but sit the bottle in a big non-tipsy bowl, open it, and use a long wood handle Qtip (like the doctors use to swap a throat) to dip into the bottle. Pull the swab out, then immediately seal the bottle and apply the patina to the solder. This way there is minimum exposure and little waste to dispose of. Wear gloves. The stuff can burn skin.

5. Smoke goes up. Duh, right? But solder smoke in particular likes to rise strait up quickly in little bursts. If you are leaning over the item you are working on, it will go straight in your face & up your nose. This smoke is unhealthly at the very least even when it says "non-toxic solder". Certain solder fumes can cause lung disease over a long exposure. Do NOT breath the smoke. Wear a mask with the proper filtration rating, use fans and good ventilation. Don't hover over the item you are working on.

6. Gravity applies to hot soldering irons. Most soldering irons have heavy duty stiff cords that may actually weigh more than the iron itself. If the cord dangles off the side of your work surface, it may actually pull your soldering iron over the edge too which would be really bad if it is hot. Use a soldering iron stand with a heavy base, and/or use a piece of duct tape to tape the stand base and the base of the cord to the work surface.

7. Remove all flux from glass and solder immediately after it cools. Flux is an acid and it will continue working and could etch the glass and discolor the solder. You can then patina the solder or polish it to a shiny silver using a solder polishing compount. To maintain the color of the solder, seal with wax. You can get the patinas, compounds and wax at any stained glass supplier.

Troubleshooting
Here are a few common problems and some likely causes why they might occur.

The copper tape lifted off the glass during soldering or after - The tape had a spot of poor adhesive, or it was not burnished to the glass thoroughly before applying flux and the flux got under it. This can be even more of an issue if you use multiple strips of tape vs. one continuous piece.

The copper tape got a hole in it while soldering or stuck to the iron - The soldering iron was held in one place for too long or you went over and over the same area trying to smooth the solder. If you can, try pealing it off or covering with new tape, flux and solder again.

There are tiny pinholes or bubbles in the solder - Your copper tape is not good quality or it was not adhered well and the glue melted up through the solder when it was heated. Or you used too much flux and it boiled and made bubbles.

The soldered edge is skinny on one side and fat on the other - This is most likely because the copper tape was not centered on the glass edge. Or it could be that the glass was tilted during soldering so more solder flowed to one side than the other.

The soldered frame is crooked - Most likely caused by not putting the tape on straight. If the tape is crooked, you can use an exacto knife to trim before you solder or remove and put a new piece on.

The glass broke - A single area of the glass got too hot during the soldering process because the iron was held in one place too long. Or, the items sandwiched between the glass were too lumpy. Lumpy items must be balanced with other lumpy items of equal height between the glass so the glass cannot teeter-totter and get stressed enough to break.

There is fog or moisture under the glass - The items between the glass were moist, probably from glue that was not yet dry. The heat of the soldering iron created steam. Or, after soldering, cleaning solution or other liquid ran under the solder. Solder does not make a watertight seal. Items should not be worn in the shower or even in heavy rain.

My soldering iron will no longer melt the solder - Or the solder gets stuck to the tip. Verify that the melting point of the solder you are using is low enough to be melted by your iron and that your iron is fully heated. Check the iron tip. If the tip of the iron no longer appears silver even after wiping on a damp sponge, try sanding it with sanding paper (while it is cool) to re-expose the silvered tip. Heat and resilver the tip. If that does not work, you can try a Sal Ammoniac* block. This stuff is nasty and toxic. Do NOT breath the fumes. Here are some great instructions from Volcano Arts on cleaning your soldering iron tip. If cleaning does not work, replace the tip when the iron is cool. It is easy... There are usually one or two tension screws to loosen and the tip should come right out. If it is stuck, try tapping it lightly or twisting with plyers. If all the above does not work, it may be the iron itself or the electrical outlet.

*Note, this is ammonia... as mentioned above do not EVER mix patina solution and ammonia. Store these items faw away from each other.

My solder is lumpy - Practice makes perfect. Use one fluid motion like a long painting stroke to float the solder along the tape with the iron barely touching to make the smoothest bead. Be sure to hold the tip so you are using the wide, flat edge. Also, it helps to have a good iron that keeps a constant temperature. Most importantly, flux well and often. Solder cannot flow without flux. Make sure you coat the whole section to be worked with flux but don't try to do too big of an area at once. If you flux and don't immediately solder, reapply flux.

Don't let the above intimidate you from trying soldering yourself. Yes, there are a few issues and some safety things to think about, but anyone can do it and you can produce really pretty piece that you and others will love very quickly and economically. Happy creating!

Love, Peace & Squiggles! and a Dove Rescue!

Today a kind fellow Etsy member selected my "Love, Peace and Squiggles" Pendant to be featured in a "treasury". I was honored to have my piece selected, but I admit I did not know what a treasury was in this context. I checked the Etsy Help and learned it is a member curated collection of other Etsy artists items that they publish as a small, temporary gallery for any reason they choose. Occasionally, the Etsy team selects a treasury to be featured on the front page which is a nice opportunity.

The treasury is called

"For Frankie" by "crookedlittlestudio" and is a collection of dove related art.

CLS writes "Frankie is an unlikely name for a dove, but after he survived the first night (he had fallen out of his nest and had been abandoned), I named him after St. Francis, patron saint of animals. He ate, flourished, and learned to fly. Yesterday he flew away. I miss him."

Sounds like behind the "crooked little studio" a tender hearted soul who is probably much loved by Frankie the dove. Check out her wonderful artwork at the studio link above.

SEEKING THE RAINBOW New Fine Art Print Released Today

Hello, I have just released a new art print today called "SEEKING THE RAINBOW". It is a digital painting made from 2 of my photographs worked together in Photoshop CS3. It is available as a fine art print with or without custom framing in my ImageKind Gallery (under my photography name "Kamera Kat").

(Note - It's difficult to see the rain in this small image. You can zoom in on the print on the ImageKind site.)

I would love to hear what you see in the picture. Leave a comment! =o)

This is what I see... When the storms of life rain down, delight in the promise of finding a new rainbow at the storms edge. Then, realizing that the rainbow did not exist until this storm created it, we can be thankful for the storm even while we are still in it.

"And God said, "...Whenever I bring clouds over the earth and the rainbow appears in the clouds, I will remember my covenant between me and you and all living creatures of every kind. Never again will the waters become a flood to destroy all life." Gen. 9:14

New Soldered Glass Jewelry Just Added to the Store!

Just a quick note about soldered glass jewelry... 1. I just released some new pieces today and there are more coming soon! 2. I am working on "How to create soldered glass slide jewelry, Part 4 - Tips & Troubleshooting.

Like anything else, there is a learning curve to making the soldered jewelry and I have already learned a few things in the short time I have been doing it. I will share what I have learned and give some advise on how to avoid and fix boo-boos. I am pretty sure I might be an expert on that now because I am quite boo-boo prone. Hopefully I can help someone else avoid them.

Anywhoo... here's a peak of some of the new pieces that are in the store or will be soon.

P.S. - I am sort of excited about the chokers because I had fun making handmade jumprings, the S-Hook closure and bale out of wire and soldering it all. It was cool using the soldering iron for something besides pendant edges.

A Rose By Another Other Name... Would still be featured in a zillion photographs and peoms.

Last week I mentioned I was on a bird kick and had created a lot of art featuring the little chirpers. I just realized I have a second recent obsession too...roses.

I have just released 3 new rose prints in my ImageKind gallery. I also have greated several pieces of jewelry featuring this romantic flower.

Though roses have been featured over and over in just about every medium imaginable, we never seem to get tired of their beauty and the romance they represent. At least that's true for us chicks. ;o)

The rose has always been the inspiration for artist, song writers and poets. Maybe because it is so intricate but just simply beautiful too. I guess there is a lot you can say about something that is complex and simple at the same time.

"You love the roses - so do I. I wishThe sky would rain down roses, as they rain from off the shaken bush. Why will it not? Then all the valley would be pink and white and soft to tread on. They would fall as light as feathers, smelling sweet; and it would be like sleeping and like waking, all at once! " ~ Roses by George Eliot

Cool! Free Publicity! I'll take it!

Well this post is about 1 month overdue, but I'm posting it anyway because I am exicted. A fellow ImageKind member emailed to tell me that a daily art review blog called "Art Sweet" featured me as the artist of the day May 26, 2008. What a nice surprise!

Quote: "Today’s featured artist is Lisa Whipkey. Lisa is a wonderful multimedia artist. Her use of color, texture and layering is simply fantastic! My favorites are “Love Grows”, “Opium” and “Venice Vase”. - ArtSweet"

I have been blessed to have my work featured on many blogs in the last couple of years (love that free publicity!) and I have had a few kind art reviews, such as this one from the "Naked Genius", but I am always excited every time I am ego surfing (google myself) and find that someone liked my work enough to give it some special attention. I believe every artists work speaks to someone and we all like that affirmation that someone out there "gets" what we do. So thanks Art Sweet for making my day!

My new favorite folk artist inspires people in more ways than one

Be True
Originally uploaded by Paulette Insall

Modern Folk Art at its finest. That's what I see when I look at the art work of Paulette Insall (http://www.pauletteinsall.com/). I have seen her art on flickr and for sale in her Etsy shop and oogled (is that a word?) over it for more than a moment. I love the simplicity of it at first glance, but then I love it's complexity that becomes apparent the more you look at the work. Maybe I also love it because it is inspiring me to want to paint folk art again. It has been several years since I did anything other than abstract painting and I'm wondering why now because I really enjoy folk art painting even more.

The angel door topper is something I painted for my sister back in 1999. I have not painted anything like that since, but now I think I am ready to give it another try thanks to Paulette's inspiring work.

Paulette not only inspires with her paintings, but she is a Christian artist who is open about her faith and witnesses with her work and websites. She makes wonderful YouTube videos about her art that are backed with contemporary Christian music and I just love it.

I am so glad to have found her on the web!

Please check out her store, blogs & vlogs via her site www.pauletteinsall.com.

Birdies, Birdies Everywhere!

Hi. Hope you are having a 'tweet' day! I know I am. That's because for some unknown reason (maybe its because I wake daily to a gazzilion birds chirping at the feeder in my back yard) I have gone crazy for cute little birds lately and have incorporated them into my living room decor and also created a whole bunch of new jewelry featuring bird illustrations collaged over vintage ephemera. I am pleased to say my fondness for feathered friends must be shared by others because I have had a positive response to the jewelry. On some of the reversible glass pendants I have encased a real feather under the glass which I think is kind of fun! I have not tried this with the soldered pendants yet. I am curious to see how the feather handles the heat of the soldering iron. It's fun trying new things. Have a tweet day yourself!

Introducing our new line of vintage inspired jewelry!!

Hello, Well it has been too long since I have blogged (again I neglect you my poor ol' blog) but I have another good excuse... I have been busy working on a new line of jewelry for TreeBySea.com. Until now we have only carried fine silver jewelry. (http://www.treebysea.etsy.com/).

Just yesterday I launched a second store featuring soldered glass slide pendants, collaged ephemera pendants, and romantic victorian jewelry with swarovski crystals and antique metal.

Please visit the new store on Etsy!! http://www.treebysea2.etsy.com/. Thanks for visiting! Wish me luck!